500-mm long aluminium billets of 250-mm diameter are separately forward extruded into bars of…

Are you stressed by poor grades and tight deadlines? We have your back at expert-tutor.net. We can do this or a different assignment for you at an affordable price. Use customdissertations.org writing services to score better and meet your deadlines.


Order a Similar Paper Order a Different Paper

500-mm long aluminium billets of 250-mm diameter are separately

forward extruded into bars of 125-, 50-, 25-, and 12.5-mm diameter at 500°C

using a ram speed of 0.75 m/min. Flow rule is defined through C = 14 MPa,

and m = 0.22 with ?f0 = 35 MPa. The die angle is 2? = 140° whereas the Coulomb

coefficient of friction is 0.08.

a) Determine the extrusion force through the analytical approach for the

four bar diameters,

b) Determine the extrusion force through the empirical approach for the

four bar diameters,

c) Compute the exit velocities of the extrusions in the four cases,

d) Figure out the ram speed that will give an analytical extrusion force of

4000 kN for the bar with 12.5 mm diameter, and

e) Elaborate on whether the press is feasible enough for the economical

extrusion of bars of these sizes.

Attachments:

Writerbay.net

We offer CUSTOM-WRITTEN, CONFIDENTIAL, ORIGINAL, and PRIVATE writing services. Kindly click on the ORDER NOW button to receive an A++ paper from our masters- and PhD writers.

Get a 10% discount on your order using the following coupon code SAVE10


Order a Similar Paper Order a Different Paper